Flow Meter Avery Hardoll CM 1000

CALIBRATION

Calibration adjustment is provided to minimize the meter error at any selected flowrate. Adjustment isstepless; no gear changing is necessary; and the calibration screw is easily accessible after breaking aseal and removing a sealing screw.All meters are tested to 300 psi (21 bar).All Avery-Hardoll meters are tested before despatch at a range of flowrates and test certificates can besupplied if requested.The fluid used for testing is odorless kerosene.Specific gravity at 60/60ºF, 15/15ºC = 0.8Viscosity at 60ºF, 15ºC = 2.4 centistokes.Suggested correction to be made to the calibrating mechanism when used with products with differentviscosities as follows:Gasoline+ 0.1%Kerosene0.0%Gas Oil– 0.1%Fuel Oil–0.22%+means increase counter readings–means decrease counter readings

Flow Meter Avery Hardoll CM 1000

• Meter Size : 2,5 Inch

• Model : CM 1000

• Flow Rate : 22 to 220 (Imp Gall), 100 to 1000 (Lpm), 6 to 60(m3/hr)

• Flanges : ASA 125 FF Ductile Iron Steel